2006
 
Auto & Repair

Engine does not turn over when attempting to start



Check the battery state of charge and condition. If the dash lights are not visible or very dim when turning the ignition key on, the battery has either failed internally or discharged, the battery cables are loose, excessively corroded or damaged, or the alternator has failed or internally shorted, discharging the battery.

Charge or replace the battery, clean or replace the battery cables, and check the alternator output.
















Check the starter motor, starter solenoid or relay, and starter motor cables and wires. Check the ground from the engine to the chassis. Make sure the wires are not loose, damaged, or corroded. If battery voltage is present at the starter relay, try using a remote starter to start the vehicle for test purposes only. Replace any damaged or corroded cables, in addition to replacing any failed components.

Check the engine for seizure. If the engine has not been started for a long period of time, internal parts such as the rings may have rusted to the cylinder walls. The engine may have suffered internal damage, or could be hydro-locked from ingesting water. Remove the spark plugs and carefully attempt to rotate the engine using a suitable breaker bar and socket on the crankshaft pulley. If the engine is resistant to moving, or moves slightly and then binds, do not force the engine any further before determining the problem.
Check the operation of the neutral safety switch. On automatic transmission vehicles, try starting the vehicle in both Park and Neutral. On manual transmission vehicles, depress the clutch pedal and attempt to start. On some vehicles, these switches can be adjusted. Make sure the switches or wire connectors are not loose or damaged. Replace or adjust the switches as necessary.
Car Engine Wont Start
 
 
Directory
 
Home Repair Tips
Custom Search
Search Engine Repairs.com
 
Custom Search
Search Engine Repairs.com